Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Clean up my Termis

[dst1]

What would be the best stuff to get a good shine on my Termis

What do they come up like doing it by hand...

[749er]

autosol is good, it comes as a paste, black and gold box. you just rub it on by hand but you can buff it up with a dremel also.

[dst1]

Thought I would need to use something more abrasive than Autosol

You are correct it is good stuff but could never get dull metal to really shine up

[philthy]

I think screwy reckoned on using a scotchbrite polishing wheel for the pipes. I would have thought that solvol would be fine on the end of the exhausts though, as that has a more polished finish..

The carbon cans on mine have gone brown with age but I'm assuming that nothing can be done about that.

[Fordie]

Autosol, work at it and you could shave with the polish surface. 4D

[dst1]

Many thanks guys

[Sut888]

Philthy
The carbon cans go normally go brown when the wadding needs replacement - the can gets too hot and the resin goes through repeated curing cycles. Just touch your cans after the bike has warmed up (carefully). They should not be any where near hot enough to burn your fingers.

[philthy]

Sut

Thanks for the info. I take it that the damage is now done and there is no way of refurbing them other than new sleeves?