Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Tyres > 180/190

[Col996s]

I know there is a debate about which tyre size is best (turn in, lean angle ect) but can I clarify that I can fit EITHER a 180/55 or a 190/50 to my 996s without any fitment worries.

[Fordie]

Originally Posted by Col996s

I know there is a debate about which tyre size is best (turn in, lean angle ect) but can I clarify that I can fit EITHER a 180/55 or a 190/50 to my 996s without any fitment worries.

Yes either would fit OK Ive had both on my 996

[chris.p]

You can add to that a 190/55


Chris

[Col996s]

Thanks guys.

My front tyre has plenty of life left in it. I assume it's quite acceptable to mix manufactures, front and rear.

[deej]

not usually mate, tyres are designed to work as a pair

you could mix tyres from the same brand ie diablo front and a corsa rear but its usually a big nono to fit say a pirelli front and a bridgestone rear, one companys idea of a 180/55 profile is different to anothers as is the tread pattern

on my 916 i found a 180/55 was better than a 190/50 for fast road/track riding

[Chef]

Agree with the not mixing - have done it & regretted it....

Also check you have clearance for a 190-55 as they can foul the exhaust

[Ray]

Originally Posted by chris.p

You can add to that a 190/55


Chris

I've been tempted to go this route a few times on me 998r but been put off by the clearance issues some say kibosh this choice.

I'll maybe give it a go sometime just to see if it will fit my particular bike. It does have a DP hugger fitted.

Having said that I can't tell the difference between a 180 and 190

Ray.