749 Clutch

jangol · 09-Mar-2012, 22:20

Hi,

Was in the process of changing my clutch & pressure plate over this afternoon to find out my clutch plates are knackered...

Any ideas of what makes I should be looking @ & where I should be looking

Also I'm after a Clutch Hub Assembly.. had a little accident removing a spring?

Any ideas on where I could get a replacement or where I could get it mended if poss

chrisw · 09-Mar-2012, 22:37

If no one comes along with the part for you then Jim Redmond is always worth a call 01708 455530. You will also need to get your hands on a clutch holding tool and a big f**k off breaker bar and torque wrench as that centre nut is 190nm!

jangol · 09-Mar-2012, 22:44

Cheers, What's the clutch tool used for... can a clutch change be done without one??

As just looked @ a price for one?

jangol · 09-Mar-2012, 22:51

Just answered my own question.. I think?? only used if I changing the clutch hub right??

Won't need it if I just change the plate only right??

chrisw · 09-Mar-2012, 22:55

Yes just the hub, as in

jangol · 09-Mar-2012, 22:57

Cool Thanks...

Hope someone has a bargain on here.. as going to cost a fair whack for a hub & plates...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

09-Mar-2012, 22:37	#2
chrisw Registered Forum User 500SD Bikes: 999 Mono/1198S Posts: 803 Join Date: Jun 2002 Location: Yorkshire Mood: Messing with diagnostics If no one comes along with the part for you then Jim Redmond is always worth a call 01708 455530. You will also need to get your hands on a clutch holding tool and a big f**k off breaker bar and torque wrench as that centre nut is 190nm! Reply

09-Mar-2012, 22:44	#3
jangol Registered Forum User Mille Bikes: 1098s, 749 Posts: 129 Join Date: Jan 2012 Location: Bedfordshire Cheers, What's the clutch tool used for... can a clutch change be done without one?? As just looked @ a price for one? Reply

09-Mar-2012, 22:51	#4
jangol Registered Forum User Mille Bikes: 1098s, 749 Posts: 129 Join Date: Jan 2012 Location: Bedfordshire Just answered my own question.. I think?? only used if I changing the clutch hub right?? Won't need it if I just change the plate only right?? Reply

09-Mar-2012, 22:55	#5
chrisw Registered Forum User 500SD Bikes: 999 Mono/1198S Posts: 803 Join Date: Jun 2002 Location: Yorkshire Mood: Messing with diagnostics Yes just the hub, as in Reply

09-Mar-2012, 22:57	#6
jangol Registered Forum User Mille Bikes: 1098s, 749 Posts: 129 Join Date: Jan 2012 Location: Bedfordshire Cool Thanks... Hope someone has a bargain on here.. as going to cost a fair whack for a hub & plates... Reply