Wanted Ohlins 916 etc forks!

Swinz · 16-Apr-2012, 00:07

Hi All

Bought some Ohlins forks for my trusty steed end of last year (on fleabay) only to find that i have 1 from a 916 (flat discs) and 1 from a 996 ( not flat discs

)

. What i need is direction, either a flat disc fork or a not flat disc fork. You guys know what i'm talking about. Anyone out there able to help !!!! I can supply OEM fork No's.

Thanks

Andy

skidlids · 16-Apr-2012, 11:10

Well you could get the one for the 10mm offset disc machined to match the other fork leg and then use the 748R 15mm offset discs. Should be a simple enough job for a engineering workshop with a Mill
Or you could just use 5mm spacers on one side

pguenet · 16-Apr-2012, 21:08

Or take this as an excuse to change both bottoms for some nice billet ones...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

16-Apr-2012, 21:08	#3
pguenet Registered Forum User Big Twin Posts: 1,413 Join Date: Aug 2002 Location: Surrey Or take this as an excuse to change both bottoms for some nice billet ones... Reply