Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Corse Seat Unit

[Walenut]

Will a Ducati Corse seat unit, the ones with the Corse sticker on the rear originally fitted to the R’s fit a bip?

[bolds]

Do you mean the ones fitted to 996/998/748R ?

If so then they will all fit straight on, only the 998R does not have vents

[bolds]

Sorry missed the BIP bit

Will still fit ok but you will need a new seat pad and seat pin bracket with spacers

[Walenut]

Cheers mate.

[Bionicle]

Will still fit ok but you will need a new seat pad and seat pin bracket with spacers

I fitted one yesterday, could not work out for the life of me why i could not get it to lock down, finaly realsed that the seat pin was not low enough to lock into the locking hole, bodged a couple of quarter inch spacers and it was fine.

[madmav]

steve ! they sure do come and check out mine! mav

[Old Yella]

You just need the two spacers to lower the locking pin.

Not expensive or you can use some odds and sods of bolts and spacers to lower it enough.

[Walenut]

Right then any body got one, 97 SPS style.