piece of cake mate . drain oil or lean bike right over on left side to stop oil running out .remove all bolts on clutch cover leave all hydrolics connected pull of cover . slacken bolts in springs to take of preasure . remove big c clip and all plates will come out easy as that about twenty miniutes start to finish. make sure nobody pulls the clutch lever untill its back together good luck see you saturday
I had a seminal moment a Cadwell, guru san Spencer showing me how it is done.....it was like flicking the 'go fast' switch in my head.
As I'm sharing the bike I've had limited race/prep time to date, now with 1 proper race (CC) and a dedicate trackday DSC at Cadders I feel up to speed!