Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > General Motorcycles only > Wellnuts ?

[tsmales]

I know the topics been done to death, but. What sizes do I need for an ST 2 fairing ?

Please ?????

[khushy]

M6

[Rushjob]

You only need M6 for the 4 holding together the belly pan and the two holding the sides of the centre sections.
All of the rest are M5 and there are loads of the damn things.......
I really must get around to a Dzus conversion.

[YMFB]

I understood that Dzus are not practical for the ST as the middle section is fixed through its top flange ? Please someone tell me that im wrong and even better still post some pics

[Rushjob]

There is a mod you can do to allow removal of the centre section without moving the handlebar section it involves removing a bit of the overlap inside & manufacturing a plate to help support the fairings, a bit of work but not too onerous... if you go to the ST Owners Group on Yahoo there's loads of info in the files.....

[tsmales]

Cheers.

[Rushjob]

Don't buy the genuine ones, go into a builders merchant or similar & buy Rawlnuts.... same thing but loads cheaper.
If you can't get any, let me know & I can source them at about £17 or so for 50

[tsmales]

Thanks for that, I'll get in touch if I have a problem finding some.