SS Fairing bolt collars - sources please?

Iconic944ss · 21-Apr-2006, 00:01

Totally tired of the BLUE scruffy looking, naff Alloy bolts and collars on my 900ss.

So, I'm changing to stainless as I'm working my way through things. - I remember seeing a source somewhere for the large recessed washers (is collars the proper name?), but can't remember who.

Dave Middleton maybe?

Hawk fastners have them but not in the larger sizes yet.

Ideas please.

Frank

ps - I dont fancy converting to Dzus fasters either - however handy they are.

FiscusFish · 21-Apr-2006, 00:39

http://www.inoxbolt.co.uk/productmainmenu.htm and then "Fairing cup washers".

Iconic944ss · 21-Apr-2006, 00:54

Brilliant Darren, thanks.

I can feel my credit card getting worried!

Frank

chicken · 21-Apr-2006, 08:38

Frank, aren't these small enough to paint yourself without looking like a diy job?

FiscusFish · 21-Apr-2006, 10:01

Bare in mind though Frank they are a milled finish rather than polished/smooth, plus you'll need countersunk screws to go with them.

paynep · 21-Apr-2006, 11:05

I found that buying original Ducati parts worked out about the same price as aftermarket ones.......

Iconic944ss · 21-Apr-2006, 11:59

Ahhh, but the magic words 'stainless steel' are what swings it for me.

gotta love it.

TassieDave · 21-Apr-2006, 12:13

DesmoParts make s/steel and titanium fairing washers. US$15 a pair for stainless, US$25 for titanium - I bought 4 pairs for my 93 900SS (seat and fairing). Also sell complete body and engine kits containing stainless steel fitting and nylon washers. Bought a set of each and I'm slowly replacing the original bolts with stainless - being sure to use some anti-seize compound of course.

http://www.desmoparts.com/ducati/washer/washer.htm

Iconic944ss · 21-Apr-2006, 12:18

Welcome TassieDave,

I'd forgotten about them and I actually bought a std bolt kit from them on Ebay.com about 3 years ago and there are still some bolts I have not fitted yet!

I do like the look of the domed fairing washers.

However, given shipping costs and waiting time, I think I'll go with Darrens suggestion + its nice to wave the flag whenever possible.

Good post - Cheers.

Frank
DSC Webteam

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

21-Apr-2006, 00:39	#2
FiscusFish Registered Forum User 500SD Posts: 782 Join Date: Feb 2004 Location: Welling Mood: Must fix Superlight... Must fix Superlight... http://www.inoxbolt.co.uk/productmainmenu.htm and then "Fairing cup washers". Reply

21-Apr-2006, 00:54	#3
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east Brilliant Darren, thanks. I can feel my credit card getting worried! Frank Reply

21-Apr-2006, 08:38	#4
chicken Registered Forum User Big Twin Posts: 1,670 Join Date: Dec 2003 Location: Brick Lane Curry House Mood: suck, squeeze, bang,......fart? Frank, aren't these small enough to paint yourself without looking like a diy job? Reply

21-Apr-2006, 10:01	#5
FiscusFish Registered Forum User 500SD Posts: 782 Join Date: Feb 2004 Location: Welling Mood: Must fix Superlight... Must fix Superlight... Bare in mind though Frank they are a milled finish rather than polished/smooth, plus you'll need countersunk screws to go with them. Reply

21-Apr-2006, 11:05	#6
paynep DSC Club Member Ducati Meccanica Posts: 2,081 Join Date: Jun 2001 Location: Alton Mood: Wet wet wet I found that buying original Ducati parts worked out about the same price as aftermarket ones....... Reply

21-Apr-2006, 11:59	#7
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east Ahhh, but the magic words 'stainless steel' are what swings it for me. gotta love it. Reply