coring silencers

keith888 · 17-May-2006, 13:52

Dear all,

As I'm stuck not being able to ride the bike, my thoughts have turned to improvements. I fancy having a go at coring a set of silencers to liberate some more noise . The ones on the bike are perfect so I don't want to attack those but I notice there are a currently a pair of '94 SS 900 silencers (ZDM-A04 and ZDM-B04) on fleabay. Does anyone know if they will fit the 888 Strada?

Thanks,

Keith

BDG · 17-May-2006, 14:04

I look at my bike and say "Cor" every day, sorry thats not very helpfull

loony888 · 18-May-2006, 08:25

as you can fit after market cans between 851/888 and 900SS i can't see why they won't fit. note though they are different (internally i think) between the SS and 8xx type. i think i read that on brads moto one pages.

keith888 · 18-May-2006, 14:05

Thanks for that. I'm not bothered about the internals as those would get butchered in any case.

Keith

Screwy · 19-May-2006, 14:53

Not sure if its of any help , But Ive cored and fitted 900 superlight cans to my 851/888 and apart from having them cut and shut to match the angle of the seat they went on fine though being hi rise I obviously had to sort the mounts out .

Iconic944ss · 19-May-2006, 15:35

Some 900ss info on Coring:

http://www.geocities.com/when_pigs_fly_mc/mufflers.html

Good luck - Frank

keith888 · 19-May-2006, 17:17

Thanks Frank. That was one link I had not seen and it looks good!

Keith

Iconic944ss · 19-May-2006, 21:18

No problem Keith, there was another one as well but the site seems to be down / non-existant:

http://www.ducatipipemod.com/

Cheers - Frank

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

17-May-2006, 14:04	#2
BDG Registered Forum User Ducati Corse Posts: 3,893 Join Date: Sep 2003 Location: The North Mood: Daft as MartinH after too much Smirnoff Ice I look at my bike and say "Cor" every day, sorry thats not very helpfull Reply

18-May-2006, 08:25	#3
loony888 Registered Forum User Mille Posts: 382 Join Date: Sep 2005 Location: brisbane australia Mood: sensational!! as you can fit after market cans between 851/888 and 900SS i can't see why they won't fit. note though they are different (internally i think) between the SS and 8xx type. i think i read that on brads moto one pages. Reply

18-May-2006, 14:05	#4
keith888 Registered Forum User GTL Bikes: Ducati 888, Suzuki RG500, Triumph Preunit Posts: 403 Join Date: Jun 2005 Location: Nottingham Mood: On the up Thanks for that. I'm not bothered about the internals as those would get butchered in any case. Keith Reply

19-May-2006, 14:53	#5
Screwy Registered Forum User Mille Posts: 359 Join Date: Mar 2005 Location: Bradford West Yorks Not sure if its of any help , But Ive cored and fitted 900 superlight cans to my 851/888 and apart from having them cut and shut to match the angle of the seat they went on fine though being hi rise I obviously had to sort the mounts out . Reply

19-May-2006, 15:35	#6
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east Some 900ss info on Coring: http://www.geocities.com/when_pigs_fly_mc/mufflers.html Good luck - Frank Reply

19-May-2006, 17:17	#7
keith888 Registered Forum User GTL Bikes: Ducati 888, Suzuki RG500, Triumph Preunit Posts: 403 Join Date: Jun 2005 Location: Nottingham Mood: On the up Thanks Frank. That was one link I had not seen and it looks good! Keith Reply

19-May-2006, 21:18	#8
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east No problem Keith, there was another one as well but the site seems to be down / non-existant: http://www.ducatipipemod.com/ Cheers - Frank Reply