Chip for cored cans

andya · 22-May-2006, 22:24

I'm in the process of coring my cans, all stripped,just waiting for the bits from AA16 to arrive now.

The engine (93 888) is standard apart from that. Do I need to replace the chip, and with what?

I've read loads of posts and articles on t'internet on this and am just confused!!

Any first hand experience from you guys would be very helpful.

Thanks
Andy

PS. Its not for more power, just dont want to damage engine

[Edited on 22-5-2006 by andya]

aka.eric · 23-May-2006, 16:51

Mine had the SP silencers and airbox lid cutaway.The chip was "888SPO-038B".The "B" refers to open pipes.
Id give JHP a ring,the chips are not expensive.

Jools · 23-May-2006, 19:46

I've got cored cans and an open airbox....not near the bike at the moment but it fuels really well, no idling problems, no low speed hiccups and no flat spots I'm not near the bike at the moment. Tell you tomorrow what the chip is. If it's the same as aka.eric's it's gotta be a safe bet.

Mr. R · 23-May-2006, 20:14

JHP are indeed the place to speak to,but you need to know if your bike is fitted with a p7 or p8 ecu,as the chips can't swaped between the two.

Steve

andya · 23-May-2006, 21:07

Thanks guys,

If the chip wasnt changed, what potentially could happen?
Am I right in thinking it will run too lean?

Is there a jhp website or has anyone got the number?

Oh and how do I tell P7 from P8

[Edited on 23-5-2006 by andya]

[Edited on 23-5-2006 by andya]

aka.eric · 23-May-2006, 21:20

JHP also Ducati Coventry,website tel no etc.
Ecu will look like this-

andya · 23-May-2006, 22:51

Thanks mate
I'll give them a call in the morning.

Thats a P8 Ecu, yes?

aka.eric · 24-May-2006, 00:26

According to the books the P7,IAW 043 was used 1988 to 1993(to #000507).The P8,IAW 435 was used 1993 to 2000(from #000508).
The ECU in the 888 I had was labelled IAW 437?

Mr. R · 24-May-2006, 01:14

Hi, the ecu in aka.eric's picture is a p8,you can tell this by the large "blob" of white silicon,that looks like a child has been playing with the toothpaste tube!
The p7 has no such "blob",it's the only way to tell easily by eye.

Steve

andya · 24-May-2006, 22:33

Eric
My Ecu is labelled IAW 437 also!

Anyway, ordered a chip from JHP..£25 +vat..Bargain.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

23-May-2006, 16:51	#2
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 Mine had the SP silencers and airbox lid cutaway.The chip was "888SPO-038B".The "B" refers to open pipes. Id give JHP a ring,the chips are not expensive. Reply

23-May-2006, 20:14	#4
Mr. R Registered Forum User Posts: 42 Join Date: Feb 2006 Location: The Mad House, Very Sunny Cornwall JHP are indeed the place to speak to,but you need to know if your bike is fitted with a p7 or p8 ecu,as the chips can't swaped between the two. Steve Reply

23-May-2006, 21:07	#5
andya Registered Forum User Mille Posts: 142 Join Date: Jan 2005 Location: Taunton,Somerset Thanks guys, If the chip wasnt changed, what potentially could happen? Am I right in thinking it will run too lean? Is there a jhp website or has anyone got the number? Oh and how do I tell P7 from P8 [Edited on 23-5-2006 by andya] [Edited on 23-5-2006 by andya] Reply

23-May-2006, 22:51	#7
andya Registered Forum User Mille Posts: 142 Join Date: Jan 2005 Location: Taunton,Somerset Thanks mate I'll give them a call in the morning. Thats a P8 Ecu, yes? Reply

24-May-2006, 00:26	#8
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 According to the books the P7,IAW 043 was used 1988 to 1993(to #000507).The P8,IAW 435 was used 1993 to 2000(from #000508). The ECU in the 888 I had was labelled IAW 437? Reply

24-May-2006, 01:14	#9
Mr. R Registered Forum User Posts: 42 Join Date: Feb 2006 Location: The Mad House, Very Sunny Cornwall Hi, the ecu in aka.eric's picture is a p8,you can tell this by the large "blob" of white silicon,that looks like a child has been playing with the toothpaste tube! The p7 has no such "blob",it's the only way to tell easily by eye. Steve Reply

24-May-2006, 22:33	#10
andya Registered Forum User Mille Posts: 142 Join Date: Jan 2005 Location: Taunton,Somerset Eric My Ecu is labelled IAW 437 also! Anyway, ordered a chip from JHP..£25 +vat..Bargain. Reply