Crash Bungs - Page 2

andys 900ss · 25-Oct-2006, 16:16

R & G do good ones for the 900ss ie and its looks like they'll fit the 620s too.

Andy

stumpy1 · 25-Oct-2006, 16:22

Quote:

Originally Posted by andys 900ss

R & G do good ones for the 900ss ie and its looks like they'll fit the 620s too.

Andy

Yeah i saw they did them for the 900ss..does that have the same frame as a 620ss????

if so i will get them!!!

Thanks Ian

couchcommando · 25-Oct-2006, 16:41

Quote:

Originally Posted by fil2

u better get a bulk order in stumps ..!! or better still get them to hold stock..or even better get them special ones that have got big ole ball bearings in the end and are about 4 foot long.....

ring ring

" speedymoto how can i help you "

Stumpy " i would like to order 400 sets of crash bungs "

" are you a dealer sir if so we can allocate you bulk discount "

Stumpy " this aint bulk this is for my pre season track day..im so fast i fall of and dont even stop to fall off "

hehehe

LMAO, unfairly harsh....................but true

hawk · 25-Oct-2006, 16:52

Get yourself some high tensile/ti threaded rod !!!! (coupla quid)

replace engine mount rod with the threaded one.(cut threaded one 5" longer)

grab some A@R RACING/RACE PRUDUCTS bungs about 35 quid (nc30/35 are good)

bolt on

cut fairing hole

sorted

stumpy1 · 25-Oct-2006, 17:02

Quote:

Originally Posted by couchcommando

LMAO, unfairly harsh....................but true

You people have got me all wrong....I'm older and alot wiser now!!!

katana · 25-Oct-2006, 18:01

Quote:

Originally Posted by andys 900ss

R & G do good ones for the 900ss ie and its looks like they'll fit the 620s too.

Andy

Do they fit on the early 583 as well?

Paul James · 25-Oct-2006, 19:06

If there's a bit of interest I'll machine you guys some up out of acetal. Need a few dimensions from you but they ain't rocket science to make.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

25-Oct-2006, 16:16	#11
andys 900ss Registered Forum User Big Twin Posts: 1,589 Join Date: Jul 2003 Location: nottingham Mood: #65 Double Desmo Due Champion - Class B 2007, Class A 2009 R & G do good ones for the 900ss ie and its looks like they'll fit the 620s too. Andy Reply

25-Oct-2006, 16:52	#14
hawk Registered Forum User 500SD Posts: 848 Join Date: Aug 2005 Location: In a nest Get yourself some high tensile/ti threaded rod !!!! (coupla quid) replace engine mount rod with the threaded one.(cut threaded one 5" longer) grab some A@R RACING/RACE PRUDUCTS bungs about 35 quid (nc30/35 are good) bolt on cut fairing hole sorted Reply

25-Oct-2006, 19:06	#17
Paul James Founder Member Ducati Meccanica Posts: 2,994 Join Date: May 2001 Location: Northants If there's a bit of interest I'll machine you guys some up out of acetal. Need a few dimensions from you but they ain't rocket science to make. http://www.multirole-eng.com http://www.audicator.com Check out our simple to fit, potentially life saving turn signal alert system. Reply