Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > No Modifications - what does it mean

[MLC Racing]

[quote=Senna3]

Originally Posted by Imola Duke

Panic!

I had my 600ss on the dyno today and it pushed out 57bhp

What do i do ?

A go in class A

B dont tell no one

because we cant take another debate its the weekend for god sake

That is the same as my 620 Class A DD bike....

Seems to me there are way more unbalanced cranks sitting on the seats!!

[Imola Duke]

Originally Posted by paynep

Take the 750 heads off?

You Grass!!




I'll be lucky to get 50bhp to be honest, I'm hoping my bike gets picked
random to be tested on a dyno, at least i get to see if my fueling is to pot

saves me £50 too

[phillc]

To hell with it all, I'm having the crank balanced on my Supersport!

[Rattler]

Originally Posted by Imola Duke

You Grass!!




I'll be lucky to get 50bhp to be honest, I'm hoping my bike gets picked
random to be tested on a dyno, at least i get to see if my fueling is to pot

saves me £50 too

Anyone with less than 50bhp will be lucky to be "randomly" selected for a dyno run I reckon. Unless they are some kind of racing god. - you'd need to be troubling the scorers to get some random attention -

There are a lot of very well sorted and high budget 583s out there, some probably able to make 53bhp with ease.

Get those bikes and yourselves on a diet, that's the key. I reckon with a lighter bike and light rider, you can obviously get off the line much more quickly than heavier bike/rider combinations and those 3 or 4 places you can make up into turn 1 would be really tough to make up anywhere else.

Tim

[couchcommando]

Can anyone tell me what modifications this bottom end has ?

[vespa]

I just looke at my crankshaft today and the same type of holes are present: are from factory balancing until proven otherwise (impossible to prove).

[couchcommando]

Originally Posted by vespa

I just looke at my crankshaft today and the same type of holes are present: are from factory balancing until proven otherwise (impossible to prove).

Yup and say you were to balance the crank to a finer tolerance than the factory and drill those holes a little deeper, how could this be proven, what if the factory balanced your crank better than someone elses ?

[gordonparker]

It's all up to the machinest, had my tyres balanced the other week, didn't seem right above *0 mph, took the car back, 20gms out at the front and 60gms at the back.
Same place, same machine different operator !!!!

Pot luck sometimes

[vespa]

Originally Posted by couchcommando

Yup and say you were to balance the crank to a finer tolerance than the factory and drill those holes a little deeper, how could this be proven, what if the factory balanced your crank better than someone elses ?

No hope...just doom and chance...