Wire Colours

YMFB · 27-Mar-2009, 16:54

I am now trying to re-assemble the back light of my ST and like the numpty that I am forgot to note the wire colours to the bulb holder, as it has been a major job to get the light fitting off I am keen to get it re-connected right first time.

Thanks

Iconic944ss · 27-Mar-2009, 17:35

From the WSM I have its:

Bk ( Black) to the outer shield

then

GrR (Grey-red )

and

Y (Yellow )

To the two bulb pins.

Good luck - Frank

Iconic944ss · 27-Mar-2009, 17:38

Even better, a colour version of the wiring diagram:

http://www.ducatiwiki.net/images/8/8..._Schematic.pdf

F

YMFB · 27-Mar-2009, 17:49

Frank,

thanks, i remembered your recent post about resources and found the circuit diagram you posted above. Thanks on both counts it works as long as the bulb is properly located.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

27-Mar-2009, 17:35	#2
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east From the WSM I have its: Bk ( Black) to the outer shield then GrR (Grey-red ) and Y (Yellow ) To the two bulb pins. Good luck - Frank Reply

27-Mar-2009, 17:38	#3
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east Even better, a colour version of the wiring diagram: http://www.ducatiwiki.net/images/8/8..._Schematic.pdf F Reply

27-Mar-2009, 17:49	#4
YMFB Registered Forum User Ducati Meccanica Bikes: R1200RT F800GS. Hopefully another Ducati soon Posts: 2,526 Join Date: Apr 2005 Location: Salisbury Frank, thanks, i remembered your recent post about resources and found the circuit diagram you posted above. Thanks on both counts it works as long as the bulb is properly located. Reply