dead TPS -- need new

ENGAKATS · 08-May-2009, 18:04

Hi guys,

A friend with a M620 was told that his TPS is not working. He needs to replace it but before he gets one from Ducati, it would be good to know if it's used on any other bike/car.

This is the part: Magneti Marelli PF3C/00 - 2123BE.

Any ideas?

Thanks!

Gilps · 08-May-2009, 18:57

Not sure about other models but if you need one, Rich at Louigi Moto should have one for a 620 as we thought ours was shot when we had problems with an FIM. We bought one but it turned out wasn't neded. He may do a deal if he still has it.

skidlids · 08-May-2009, 23:35

The PDC3 is used on a few other bikes includig Guzzis and possibly the MVs, I think you will find them on several Ducatis since about 1999 such as the 750/900SSie, ST2 etc
I'll have a look through my info and see what I can find
Many of the car ones have fixing holes and not slots so you may not be able to get them set up as you want

ENGAKATS · 09-May-2009, 01:43

Thanks Kev. Will pass on the info

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

08-May-2009, 18:57	#2
Gilps Registered Forum User 888 at Last !!! Posts: 967 Join Date: Aug 2006 Location: Malmesbury Mood: Glad to be here Not sure about other models but if you need one, Rich at Louigi Moto should have one for a 620 as we thought ours was shot when we had problems with an FIM. We bought one but it turned out wasn't neded. He may do a deal if he still has it. Reply

09-May-2009, 01:43	#4
ENGAKATS Registered Forum User GTL Bikes: SS 1000ds Posts: 408 Join Date: Feb 2007 Mood: crashed Thanks Kev. Will pass on the info Reply