Wanted: Clutch plates

Spjallen · 21-Dec-2012, 18:09

I'm after a set of clutch plates for a 620 or a good place to get them from please.

bally71 · 22-Dec-2012, 10:44

barnett performance jobbies

about 150 per set ... well worth the money

skidlids · 22-Dec-2012, 11:16

Are they worn out

Taken from the workshop manual

Normal Clutch
_______________
thickness of the drive plates (friction plates) should not be less than 3.5 mm.

Overall thickness of the set of clutch plates should not be less than 41.3 mm

APTC Clutch
______________
thickness of the drive plates (friction plates) should not be less than 3.2 mm.

Overall thickness of the set of clutch plates should not be less than 50,2 mm.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

21-Dec-2012, 18:09	#1
Spjallen DSC Club Member 500SD Bikes: Honda CB350 K4, Ducati 749s Posts: 545 Join Date: Aug 2011 Location: Llannerch-y-medd Wanted: Clutch plates I'm after a set of clutch plates for a 620 or a good place to get them from please. Reply

22-Dec-2012, 10:44	#2
bally71 DSC Club Member Mille Bikes: 620SS Desmo Due 800SS Minitwin 1000SS Monster 750 Posts: 391 Join Date: Apr 2008 Location: Wirral Mood: Inquisitive cat barnett performance jobbies about 150 per set ... well worth the money Reply