Quote:
Originally posted by bradders
andyb - thanks for the reply mate but didnt understand a word!!
LOL |
Imagine a 10p piece as a clock face ok, 12 at the top and 6 at the bottom etc, with me so far.. Now put a 5p piece on top. You could place it right in the centre or at the edge anywhere around the clock face, still with me?
Now, standing at the nearside of the bike, imagine the hub thats inside the swing arm where you undo the two bolts to alter the chain is the 10p piece, and if you look at the hole through the centre where you fit the spindle of your single sided stand to be the 5p piece, you want the hole to sit at around 5 o clock for the best fit, with your chain at the right tension.
This would also have the effect of moving your wheel away from your hugger!! increase your straight line stability etc etc.............
Threaded Mode