| recomended settings from hand book for 600SS
Hydraulic brake adjustment during rebound and comppression;spring preload-
turning the adjuster(the screw at the bottom of the shock)it is posible to modify the hydraulic braking of the damper during the rebound phase.
Recomended calibration;from the completely closed position(clockwise),loosen the screw by a total of 6 clicks
the knob on the reservoir will adjust the hydraulic damper during the compression phase from the completely closed position (again clockwise) loosen the knob by 25 clicks
the preload set by modifying the ring nuts 14 mm of thread showing
thats what the handbook recommends | 
30-Aug-2005, 18:18 
Threaded Mode