| E-prom fitting
Having a go at this weekend to fit the 50mm Termi`s on the 916, that side looks quite straight forward.
The e-prom looks a different matter...... oh help.
The opening is very small, the bike must have had pipes on before I took ownership as there is silver type tape over what looks like a rubber cap.
Then inside is the chip, looks old so must be original with at each end of the chip what I can only describe as a swirl of resin of some sort.
The new JHP chip does not have this resin on it, so no worries there I guess.
Will the chip come out with some gentle persuasion and will I need to use any sort of Anti static strap when replacing the new one, can I hold it with my hand without it?
Any help will be grateful | 
Threaded Mode