 |
| | |||||||||||||||||||||||||||
| | Thread Tools | Search this Thread | Display Modes |
| #3  22-Oct-2005, 21:32 | |||
| |||
| nut is good idea... had lots of success using a spark aroder in simalar situations. access needs to be good or take head off.. try local engineering firms or get it to me... top bit kit which will arode straight in and is not affected by metal hardness.. would use a hex head bit - arode in 10 mm and just unscrew broken stud out... pm me if you need to..   |
Threaded Mode