Registered Forum User
Mille
Bikes: Ducati 996R and MV Agusta F4 1000R
Posts: 219
Join Date: Sep 2002
Location: East Preston, West Sussex
Fitted both the kits on my 748 and 996. Found it wasn't a major job if you remove the parts that your putting the etching marks on and just take your time. Have a look at a few dukes in your local dealers for location ideas. I glued the transponders to the underside of the bottom yoke and on the innner spoke casting of the rear wheel. The warning sticker is on the top yoke, I know its not pretty but it has to be prominent.
BTW I go over the bike with the datadots every six months or so just to make sure it still has plenty in place.
Have fun.
23-Sep-2003, 00:12 
Threaded Mode