Quote:
| Originally Posted by keefer a slipper clutch should have 9 drive plates in it
|
Not according to the instructions supplied with a DPP strada clutch, it should have 7 3mm drive plates in it..... from all the reading i've done anything from 7 x 3mm, 8 x 2.4 or 9 x 2.4 is possible the DPP instructions say 7 for strada 9 for corsa, I'm not convinced there is a definitive answer to this, try it and see if it works is what I've been doing and have run 9 at times.
Threaded Mode