Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > 748R owners,

[Lightning Boy]

As far as I know all the R's came with 50mm Carbon Termi's, EPROM, stand and cover, and the 2001 model would have been no different. Usually a bike like this is well looked after and previous owners should have ensured that the package remained complete. Just make sure it really is an 'R'. I know some bikes were sold with Showa forks/shock (at a discount) on a production overlap but ideally it should be fitted with the Ohlins units - it should also have an alloy subframe. The R's have maintained a good resale value over the last few years but if the if the bike is not complete as it should be, then it gives you a good opportunity to knock a few quid off the asking. Rare to find an R with alloys cans and no 50mm Termigs as most owners put the Termig race cans on and assigned the alloy ones to the bin.
I run a 2001 R so if there's anything specific you want to know then drop me a U2U.

p.s. Red one's are faster.........