Quote:
| Originally Posted by Dougducati My M600 is set up pretty extreme because I like a quick turn in. I'm trying to do this from memry so bear with me!!! But I think I have about four lines showing above the top yoke and I have the rose joints wound out as far as it is safely possible. Hope this helps. |
Mines set up the same for a quick turn but done in a slightly different way to suit being taller. The top of the forks are pretty much level with the top yoke and at the rear i've got a set of the attached fitted to raise up the back.
As a general rule i think the lower the front and the higher the back the quicker it turns, but the quicker it turns the more unstable it becomes at higher speed.
Cheers,
Shandy
22-Sep-2006, 17:18 
Threaded Mode