| Don’t blame me if you chop the wrong bits off!!
The bits you chop off should look a bit like this.....
As a bit of a disclaimer, this is the version I've come up with to suit my needs... it isn't the best one, it's just another way of doing the job.
( If you decide to try it & don't want to bother with the stainless strips, the receptacles clip onto the top edge of the centre section of the fairing )
Anyhow... I'm happy with the result.
Last edited by Rushjob : 06-Oct-2006 at 20:45. | 
Threaded Mode