| bleeding brakes
any advice please ; I have just fitted new brake and clutch lines [stainless type] the rear brake bleed up aok took a while but its fine ,the clutch the same found it a right git when i first did it a few years ago and found it bleeds half way so i loosen off the slave cyl bolts by a few threads hold the lever in do them up again taking care and he presto it works now the front is proving a right tit no way will it go i pump the lever 3/4 times slack bleed nipple fluid /no bubbles flow then tighten up again still no pressure at the lever . no air or fluid leaks no bubbles coming out only fluid ? where am i going wrong have been at it all afternoon with no result any advice would be much appreciated thanks | 
25-Mar-2004, 14:42 
Threaded Mode