| Thats an excellent mileage on a great bike. Well done!
I take absolutely no issue with most that is written in the Spalding article as it contains much sensible advice. However, the statement that it takes 60-90 secs for oil to get to the cams on these engines is just not correct. Its really easy to demonstrate this. Just loosen the oil feed union at the feed to the vertical cylinder by half a turn then start the engine. Just make sure you have a spanner at the ready to retighten as oil on my 888 started to come out within 5 seconds despite it not having been started for several weeks.
Keith | 
Threaded Mode