Quote:
| Originally Posted by jejemg Yes for the 748R, it may be a smart option.
The problem may not be the airbox (somebody can make one).
It needs to modify the frame: shower TB cannot be mounted on Bipo frame and I would need intake manifolds (and perhaps valve covers??)
And to finish, finding a chip ! |
Do you need to modify the frame to use the Shower injectors, I thought that would only be required if using the 748R or RS larger capacity airbox, which is why I was hinting above about a custom airbox that would allow the use of 748R throttle bodies in a Bip frame. Your right about the inlet manifolds and inlet side rocker covers.
The IWP069 Pico injectors in the R throttle bodies flows 491cc/min quite alot more than the existing ones, but possibly still something that could be handled by the existing chip and power commander.
But with all these issues I would be considering using the existing throttle bodies and ECU and changing the injectors for ones with a higher flow rate such as those I already mentioned, if its only a matter of meeting the fuel demand for the 955 kit and cam.
But to get the maximum power then you may have to think about the 54mm throttle bodies
skidlids
Threaded Mode