Quote:
| Originally Posted by Wozzap You don't need 10 bar for your impact wrench. They work on volume of air not air pressure. All you do is **** the wrench quicker if you use it above 90psi (6 bar). |
As I didn't want to go and spend the best part of £600 on a new compressor with a higher volume than the 30CFM and 270 Litre tank one I have in the garage and upping the pressure was possible then thats what i opted for and it did the trick and got the bolt out.
A New Impact wrench would be a lot cheaper to replace than buying a new compressor but I don't need to as the Impact Gun is still working fine
skidlids
Threaded Mode