| #2  21-Jun-2004, 17:42 | |||
| |||
| There are several options,none of them cheap tho. You could source some s/h discs from ebay or this very board.Be carefull tho,as you might end up buying some that are more warped than the ones you already have.(Like I did!  )Firms like Ferodo,EBC,PFM,etc all offer replacement discs for around 300quid a pair.Add another 50-80quid for wavies. PFM do a floating conversion kit where you retain your standard disc centres.The weld on the back of the disc "buttons" is ground off and the disc removed.The new disc is fitted with new buttons that are held on with circlips.I fitted some to the wifes 900ss and they worked a treat.Cost is around 100 pounds per disc. Hmm, Just had a flick thru the catalogues.It looks like the floater kits are not available anymore.Lots of mutterings about dodgy circlips!(gulp!)So its complete discs or nothing. [Edited on 21-6-2004 by KeefyB]  |
Threaded Mode