I got the motrax kit which is the casoli one but £10 cheaper.
It fits in10 minutes all you do is bolt the bit that the number plate goes on to the bit with the two holes in, then take the 2 bolts out of the bottom of the light unit and put them through the motrax bracket and back in the original holes.
For the rear number plate light, all i did was to remove the rubber grommet that the original wires went through and put the bulb in the hole, the entire job must have taken about 10 mins max and tidys the back end up no end.
Of course you have to take that big metal ugly hangy bracket thing off the silencer first !!!!!! then fit a reflector like i did between the exhaust and the light,( see previous post )
Threaded Mode