Powder coating wheels - Page 3

antonye · 03-Nov-2010, 21:47

Quote:

Originally Posted by Col996s

On the speedo drive side there is a loose ring which engages with the speedo drive. How does this come out before I remove the bearings?

With a good pull?

Col996s · 06-Nov-2010, 18:55

Bearings out, wheels with powder coaters. I have to admit that I let a garage remove the bearings as I was struggling.
I have been looking at the bearings that were removed and they look and feel fine so not going to bother to replace.

Trig · 06-Nov-2010, 23:21

Colin - did you tell him you wanted to reuse the bearings? Been a while since I changed mine but if he knocked them out by hitting the inner races they are probably ruined.

Col996s · 07-Nov-2010, 00:02

Glenn,
He used a press to get them out. There are no signs of any damage and they rotate smoothly with no play.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

06-Nov-2010, 23:21	#3
Trig Registered Forum User Mille Bikes: Ducati 999, BSA A65 Lightning, Matchless G80s Posts: 390 Join Date: Mar 2004 Location: Chelmsford, Essex Mood: Fed up with DIY! Colin - did you tell him you wanted to reuse the bearings? Been a while since I changed mine but if he knocked them out by hitting the inner races they are probably ruined. Reply

07-Nov-2010, 00:02	#4
Col996s Registered Forum User Ducati Meccanica Bikes: 996S Posts: 2,320 Join Date: Feb 2004 Location: chelmsford Mood: Waiting for the warmer weather. Glenn, He used a press to get them out. There are no signs of any damage and they rotate smoothly with no play. Reply