Fairing Air Intakes

aka.eric · 09-Feb-2006, 16:23

Should there be any mesh in the nose cone air intakes,not shown on parts catalogue.Some seem to have it fitted,Nattyboy is it needed ?.

weeveetwin · 09-Feb-2006, 18:11

It's not original fitment eric. Don't have it on mine.

Rob B · 09-Feb-2006, 21:22

No, because the air tubes flow air in above the filter. The filter catches the bugs, birds and small children.

Rgds, Rob

851neil · 09-Feb-2006, 23:54

is anybody running the carbon corsa airtubes plus the carbon airbox ?? if so what was your filter solution - I need to steal some ideas !!
cheers

Neil

jgriff · 10-Feb-2006, 04:51

Are you talking about the 3 piece shroud assembly that has no place for a filter to fit. My answer is K&N. Standard tube type with 62mm hole. Then make up a set of collets (outside dia 61-62mm) for each Velocity stack out of nylon. Remember top make sure they are tapered. Problemo solved.

jgriff · 10-Feb-2006, 05:09

Neil, I'm getting the tank connectors machined up if they are any good you interested? Cost is not going to be cheap. I searched to country to no avail.

loony888 · 10-Feb-2006, 07:38

i'm not sure the corsa carbon air tubes will fit a road bike, the yoke offset and width don't leave enough room.

Nattyboy · 10-Feb-2006, 10:36

No mesh as standard, but I added some gold mesh to to mine just for aesthetical reasons as I think it just finishes it off nicely

If you zoom in on the attached pic you can just about see what it looks like..

Cheers

Nat

851neil · 10-Feb-2006, 11:40

loony, I've trial fitted them to the bike and they fit up a treat, this is with Harris yokes though (wider) + larger diameter Ohlins road and track forks.
No problem lock to lock.

jgriff, if you could u2u me with some costs for these - are you talking about a reducer that would allow fitup of the smaller diameter inserts or are these going to be replicas of the original parts ??

cheers

Neil

phil911 · 10-Feb-2006, 13:13

Have a look Item nbr 25 ...

... and on the following, how the original Coras looks like ...

Phil911

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

09-Feb-2006, 16:23	#1
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 Fairing Air Intakes Should there be any mesh in the nose cone air intakes,not shown on parts catalogue.Some seem to have it fitted,Nattyboy is it needed ?. Reply

09-Feb-2006, 18:11	#2
weeveetwin Registered Forum User 500SD Posts: 779 Join Date: Apr 2004 Location: Wearside It's not original fitment eric. Don't have it on mine. Reply

09-Feb-2006, 21:22	#3
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy No, because the air tubes flow air in above the filter. The filter catches the bugs, birds and small children. Rgds, Rob Reply

09-Feb-2006, 23:54	#4
851neil Registered Forum User 500SD Posts: 698 Join Date: Mar 2005 Location: Bishop Auckland Mood: need a bike... is anybody running the carbon corsa airtubes plus the carbon airbox ?? if so what was your filter solution - I need to steal some ideas !! cheers Neil Reply

10-Feb-2006, 05:09	#6
jgriff Registered Forum User GTL Posts: 496 Join Date: Feb 2006 Location: Brisbane Mood: anamorphic with overtones of sanguineness! Neil, I'm getting the tank connectors machined up if they are any good you interested? Cost is not going to be cheap. I searched to country to no avail. Reply

10-Feb-2006, 07:38	#7
loony888 Registered Forum User Mille Posts: 382 Join Date: Sep 2005 Location: brisbane australia Mood: sensational!! i'm not sure the corsa carbon air tubes will fit a road bike, the yoke offset and width don't leave enough room. Reply

10-Feb-2006, 10:36	#8
Nattyboy Registered Forum User Ducati in my Blood Posts: 4,181 Join Date: Dec 2003 Location: Swindon, Wilts Mood: Back down to 3 :>( No mesh as standard, but I added some gold mesh to to mine just for aesthetical reasons as I think it just finishes it off nicely If you zoom in on the attached pic you can just about see what it looks like.. Cheers Nat Reply

10-Feb-2006, 13:13	#10
phil911 Registered Forum User Mille Posts: 328 Join Date: Aug 2005 Location: FRANCE Mood: Privileged ... Have a look Item nbr 25 ... ... and on the following, how the original Coras looks like ... Phil911 Reply