Low speed throttle response. - Page 2

Ducman851 · 13-May-2005, 06:49

I think 6 is abit much, but coming out with them is a step in the right direction.

Rob B · 13-May-2005, 08:48

Oh, and make sure the carbs are balanced. very noticable at low throttle openings.

snagger · 13-May-2005, 20:51

Thanx for your help all.
Just balanced the carbs last week (were ok).
I'll have a tinker with the pilot screw's, find a happy setting and rebalance carbs.

Thanx, regards Phil

rockhopper · 13-May-2005, 21:45

Get the valve clearances checked. Our M600 did the same as yours but now it starts without choke (or perhaps just a tiny bit if very cold).

phil_h · 13-May-2005, 23:19

Well, I've hunted around for the carb info I used to set mine up from, but cant find it.
I'm pretty sure its 6 turns, cos the pilot screw thread is very fine, but I'll try and check mine before I go on holiday on sunday and report back (they are a ****** to get at after all !)

(Nelly and/or Louigi will know off the top of their heads I should think)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

13-May-2005, 06:49	#1
Ducman851 Registered Forum User Montjuic Posts: 77 Join Date: May 2005 Location: Temecula, California, USA Mood: Just Ducky I think 6 is abit much, but coming out with them is a step in the right direction. Reply

13-May-2005, 08:48	#2
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy Oh, and make sure the carbs are balanced. very noticable at low throttle openings. Reply

13-May-2005, 20:51	#3
snagger Registered Forum User Posts: 7 Join Date: May 2005 Thanx for your help all. Just balanced the carbs last week (were ok). I'll have a tinker with the pilot screw's, find a happy setting and rebalance carbs. Thanx, regards Phil Reply

13-May-2005, 21:45	#4
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton Get the valve clearances checked. Our M600 did the same as yours but now it starts without choke (or perhaps just a tiny bit if very cold). Reply