power commanders pc111

bike mad · 03-Jun-2006, 12:19

A'm I right in thinking that they are capable of being programmed for each cylinder individualy or is it both together,
also where is the closest place to me in devon, who can do the dyno work to make the maps as my locals dyno does both pipes as one, ie not for each cylinder,
any and all information on the power commander I need it all,
thanks

iang · 03-Jun-2006, 12:28

I have been trying to figure this out, on the PC3 program screen when 'advanced' map is selected the table is split into two, does this mean that an advanced map has been set up with both cylinders adjusted individually and the 'basic' setting is both cylinders together ?????

Is the advanced map any better ??

Jasper · 03-Jun-2006, 13:10

I believe they can only be done as a pair.Mine was.

Felix · 03-Jun-2006, 15:26

I am fairly certain that you can't map individual cylinders. The advanced mapping is to have two different maps in the PC and then select which one to use via an external switch.

twpd · 03-Jun-2006, 15:40

They can be done individually. It seems rare that they are though. It would be normal practice to run the rear pot a bit richer cos they run hotter.

Felix · 03-Jun-2006, 21:22

twpd, so can you map each cylinder seperately then even on a 4 cylinder bike?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

03-Jun-2006, 13:10	#3
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK I believe they can only be done as a pair.Mine was. Reply

03-Jun-2006, 15:26	#4
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? I am fairly certain that you can't map individual cylinders. The advanced mapping is to have two different maps in the PC and then select which one to use via an external switch. Reply

03-Jun-2006, 15:40	#5
twpd Deceased 02/10/2010 - R.I.P. Ducati Corse Posts: 3,170 Join Date: Feb 2002 Location: Darlington, Co. Durham Mood: NGRRC Minitwins champion 2007 They can be done individually. It seems rare that they are though. It would be normal practice to run the rear pot a bit richer cos they run hotter. Reply

03-Jun-2006, 21:22	#6
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? twpd, so can you map each cylinder seperately then even on a 4 cylinder bike? Reply