Help

rvfjohn · 22-Sep-2004, 21:21

Hi all hope someone can help?

When i was giving the 748 a good clean today i noticed that i could move the shock side to side in the mount on the swing arm? cant see the top mount so dont know if its moving at this point?
Any idea's
Thanks John

nelly · 22-Sep-2004, 22:10

is it actually side to side or are you twisting it on the rose joint??
If there is actual side to side play then the rod end is likely to be shot.
If in doubt, get a second pair of eyes on it or compare with another bike.

rvfjohn · 24-Sep-2004, 10:34

Thanks for the reply took the shock off and found the rose joint needs to be renewed so going to get the shock serviced while its off the bike

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

22-Sep-2004, 21:21	#1
rvfjohn Registered Forum User Posts: 17 Join Date: Oct 2003 Location: Kent Mood: Happy Help Hi all hope someone can help? When i was giving the 748 a good clean today i noticed that i could move the shock side to side in the mount on the swing arm? cant see the top mount so dont know if its moving at this point? Any idea's Thanks John Reply

22-Sep-2004, 22:10	#2
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) is it actually side to side or are you twisting it on the rose joint?? If there is actual side to side play then the rod end is likely to be shot. If in doubt, get a second pair of eyes on it or compare with another bike. Reply

24-Sep-2004, 10:34	#3
rvfjohn Registered Forum User Posts: 17 Join Date: Oct 2003 Location: Kent Mood: Happy Thanks for the reply took the shock off and found the rose joint needs to be renewed so going to get the shock serviced while its off the bike Reply