748 Mirrors

Guy C · 22-Sep-2004, 23:22

Any one tell me how to sort my mirrors so the glasses don't wander downhill at high speed/revs leaving me with a stunning view of my feet or the road

Rattler · 22-Sep-2004, 23:28

There's a small screw that you can tighten on each of the mirrors, there;s a small access hole on the underside of the main mirror body.

Tim

bolds · 22-Sep-2004, 23:30

small hole on underside of mirror has a phillips screw quite a long way up so you need a long thin screwdriver and then tighten screw that holds the ball joint

Guy C · 22-Sep-2004, 23:30

Hey Hey Hey!

Thanks a lot

Going out now to take a look

marksduc748 · 23-Sep-2004, 23:35

you might need to squirt a bit of lube in the hole cos the screws seem to go dry inside and when you go to turn it the screw flicks out of the holder.

Old Yella · 23-Sep-2004, 23:49

Hey Mark
Dont suppose you have a pair to sell knocking about do you?
I want to spray some up but want to keep some on the bike as I am still using it.
Cheers

marksduc748 · 24-Sep-2004, 20:36

hiya pal I do have one side cant remember which side but I think it is the right sided one, it is in yellow but needs tarting up I put new set on which I bought the other day off ebay for just over £60 but there only £80 odd from ducati in colour for the pair. if you want this yellow one u2u me and we will sort something out.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

22-Sep-2004, 23:22	#1
Guy C Registered Forum User Posts: 39 Join Date: May 2004 Location: Nottingham UK Mood: I ordered a Cheese Burger 748 Mirrors Any one tell me how to sort my mirrors so the glasses don't wander downhill at high speed/revs leaving me with a stunning view of my feet or the road Reply

22-Sep-2004, 23:28	#2
Rattler Registered Forum User WSB Hero Posts: 8,863 Join Date: May 2002 Location: Boys Town Mood: www.cantbearsed.co.uk There's a small screw that you can tighten on each of the mirrors, there;s a small access hole on the underside of the main mirror body. Tim Reply

22-Sep-2004, 23:30	#3
bolds Registered Forum User GTL Posts: 462 Join Date: Apr 2004 small hole on underside of mirror has a phillips screw quite a long way up so you need a long thin screwdriver and then tighten screw that holds the ball joint Reply

23-Sep-2004, 23:35	#5
marksduc748 Registered Forum User GTL Posts: 410 Join Date: Mar 2004 Mood: me in a mood? NEVER! you might need to squirt a bit of lube in the hole cos the screws seem to go dry inside and when you go to turn it the screw flicks out of the holder. Reply

23-Sep-2004, 23:49	#6
Old Yella Registered Forum User Big Twin Bikes: Kawasaki ZX10r D6f, Dawes XC2.4, Planet X Superlight Pro Carbon Posts: 1,428 Join Date: Jul 2002 Location: Selby, North Yorkshire. Mood: aving a laff Hey Mark Dont suppose you have a pair to sell knocking about do you? I want to spray some up but want to keep some on the bike as I am still using it. Cheers Reply