Best pads to use?

yeti · 04-Oct-2004, 15:05

Am about to fit some Brembo P32/36 Monoblock GP calipers (Not radials). These will be running onto RS discs which are the non ferrous discs. (They are cast I think, but don't rust).

I have no intention of running the bike on the road, so any suggestions as to the best pads to use for track day/race use?

Incidentally, anybody got any idea how Brembo machine the piston pockets? It's got me beat and I thought I had seen most things engineering! In case you're wondering what I'm on about, these are machined from solid billet and don't split in the middle. Think about it....

rockhopper · 04-Oct-2004, 16:06

I've often wondered that myself John. Must be some rather special milling machine tool. Or they just beam them down from the planet Bling...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

04-Oct-2004, 16:06	#2
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton I've often wondered that myself John. Must be some rather special milling machine tool. Or they just beam them down from the planet Bling... Reply