Corse Seat Unit

Walenut · 07-Dec-2004, 20:26

Will a Ducati Corse seat unit, the ones with the Corse sticker on the rear originally fitted to the R’s fit a bip?

bolds · 07-Dec-2004, 21:15

Do you mean the ones fitted to 996/998/748R ?

If so then they will all fit straight on, only the 998R does not have vents

bolds · 07-Dec-2004, 21:24

Sorry missed the BIP bit

Will still fit ok but you will need a new seat pad and seat pin bracket with spacers

Walenut · 07-Dec-2004, 21:26

Cheers mate.

Bionicle · 07-Dec-2004, 22:38

Quote:

Will still fit ok but you will need a new seat pad and seat pin bracket with spacers

I fitted one yesterday, could not work out for the life of me why i could not get it to lock down, finaly realsed that the seat pin was not low enough to lock into the locking hole, bodged a couple of quarter inch spacers and it was fine.

madmav · 07-Dec-2004, 22:44

steve ! they sure do come and check out mine! mav

Old Yella · 07-Dec-2004, 23:31

You just need the two spacers to lower the locking pin.

Not expensive or you can use some odds and sods of bolts and spacers to lower it enough.

Walenut · 08-Dec-2004, 10:10

Right then any body got one, 97 SPS style.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

07-Dec-2004, 20:26	#1
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic Corse Seat Unit Will a Ducati Corse seat unit, the ones with the Corse sticker on the rear originally fitted to the R’s fit a bip? Reply

07-Dec-2004, 21:15	#2
bolds Registered Forum User GTL Posts: 462 Join Date: Apr 2004 Do you mean the ones fitted to 996/998/748R ? If so then they will all fit straight on, only the 998R does not have vents Reply

07-Dec-2004, 21:24	#3
bolds Registered Forum User GTL Posts: 462 Join Date: Apr 2004 Sorry missed the BIP bit Will still fit ok but you will need a new seat pad and seat pin bracket with spacers Reply

07-Dec-2004, 21:26	#4
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic Cheers mate. Reply

07-Dec-2004, 22:44	#6
madmav Registered Forum User Ducati Corse Bikes: 1098 Posts: 3,060 Join Date: Dec 2003 Location: West Midlands Mood: Chilled steve ! they sure do come and check out mine! mav Reply

07-Dec-2004, 23:31	#7
Old Yella Registered Forum User Big Twin Bikes: Kawasaki ZX10r D6f, Dawes XC2.4, Planet X Superlight Pro Carbon Posts: 1,428 Join Date: Jul 2002 Location: Selby, North Yorkshire. Mood: aving a laff You just need the two spacers to lower the locking pin. Not expensive or you can use some odds and sods of bolts and spacers to lower it enough. Reply

08-Dec-2004, 10:10	#8
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic Right then any body got one, 97 SPS style. Reply