Losing Clutch Presure.
Fitted a new oversized Slave Cylinder as the old one just seems to seise up a few weeks ago. Everything was fine for about 20 mins till I came to some trafffic and ended up with no Clutch at all, Just a lose lever. Had to ride home with no clutch. I had fitted the Slave cylinder correctly and bleed it properly.
I got home and bleed it again, it seem to work ok for a short while them loses all presure again and no clutch.
I did notice some fluid up near the Master Cylinder, So im thinking it must be the master cylinder that now needs replacing. Do i have to buy a new one or is there a refurb kit i can buy?
Threaded Mode