45mm Termi - clamps & rubbers - help

hooley · 14-Jan-2005, 17:26

All,

I'm after some of the clamps and rubbers for a pair of Termignoni carbon fibre 45mm slip-ons.

Did a google search and came up with very little, got more by mis-spelling 'termignoni'.

Anyone know of a reasonable source, or do the standard exhaust brackets and rubbers fit???

Cheers
Jas

clint · 14-Jan-2005, 17:40

Far as i remember i used the standard clamps & rubbers on my 748. I changed to the 45mm termis.

Clint.

Walenut · 14-Jan-2005, 21:22

The standard rubbers fit because I brought some the other day and they stock two sizes, £3 each.

ath748 · 15-Jan-2005, 13:24

Yep agree with that. When I changed mine, the standard ones fitted just fine.

dukess1999 · 15-Jan-2005, 13:39

I tried to fit stock exhausts for mot, but the clamps from 50mm Termis were too small for the stockers

Old Yella · 15-Jan-2005, 15:41

Standard cans have a bigger circumference than the Termi's
I too am after a couple of the rubbers so if you get some before me post the part numbers and I will ring JHP to order.

ALso after the end strap that fastens the can end on and joins it to the other one.

Will be doing the trawl in the next few weeks if you dont get any by then I will post the part numbers.

Walenut · 17-Jan-2005, 17:51

Part no. 078810481A (I think, several numbers on the ticket) these fit my 50mm termi's and are now on the bike.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

14-Jan-2005, 17:40	#2
clint Registered Forum User 888 at Last !!! Posts: 998 Join Date: Oct 2003 Location: Camberley Surrey Far as i remember i used the standard clamps & rubbers on my 748. I changed to the 45mm termis. Clint. Reply

14-Jan-2005, 21:22	#3
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic The standard rubbers fit because I brought some the other day and they stock two sizes, £3 each. Reply

15-Jan-2005, 13:24	#4
ath748 Registered Forum User 500SD Posts: 762 Join Date: Apr 2004 Location: Switzerland and Dorking Mood: Missing my Flash... Yep agree with that. When I changed mine, the standard ones fitted just fine. Reply

15-Jan-2005, 13:39	#5
dukess1999 Registered Forum User GTL Posts: 403 Join Date: Jul 2003 I tried to fit stock exhausts for mot, but the clamps from 50mm Termis were too small for the stockers Reply

17-Jan-2005, 17:51	#7
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic Part no. 078810481A (I think, several numbers on the ticket) these fit my 50mm termi's and are now on the bike. Reply