Same Quiz, New thread

Redruth · 08-Feb-2005, 23:19

Quote:

Originally posted by monstermob 998

Quote:

Originally posted by monstermob 998
ok heres one-- is it possible to fit 600ss crank barrels and heads to 750ss bottom end(gearbox/crankcases) this will enable a six speed gearbox and the use of an oil cooler/oil temp guage would it not?or is it possible to fit oil cooler and-oil temp guage to 600SS crankcase/gearbox and then fit ducati performance aftermarket six speed gear cluster?-- just thinkin of next years project

have started planning next years project- ok so the above may not be feasible ( didnt get any replies

)apart from fitting the six speed cluster in the 600 gearbox and adding an oil temp guage as per the ducati performance catalogue part no 965069AAA where does the sender fit????? is it possible to plumb in an oil cooler to original 600 crankcases? and also in the ducati performance catalogue there are some variable-advance control units- do these just advance the ignition timing if so , for what purpose??higher torque? faster revving?or just moves the torque of the engine to lower revs ?

Where are our panelists? This chap clearly has a technical question (well, it looks like one to me, at least) and he's waiting for an answer.

The last thread is taking too long to download on my dial up so I'm starting a new one.

Get cracking, you know alls. :P

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode
Postbit Selector
Use Horizontal Postbit