subframe

tony h · 21-Feb-2005, 23:34

just converted my 996 bip to single seat & i know where theres a 916 sp? ali subfame are they pricey/hard to come by/& will it fit straight on a 996 bip im thinkin of asking if he wants to do a deal on my standard one

21-Feb-2005, 23:44

it will fit but is in my opinion a pointless upgrade .... theres plenty of them about if you look and the bip ones are common as muck so not sure he'd see any value in it .....

skidlids · 21-Feb-2005, 23:59

The SP has a different ECU (P8) to the 996Bip (1.6M), no doubt you could find someway of locating the smaller Bip unit, as for the other guy going the opposite way not only does he have to locate the bigger ECU but also the two ignition units that go with it.
Its been done before but isn't as straight forward as some may think

tony h · 22-Feb-2005, 00:24

the bike its coming off is being used as a jig so it dont matter which subframe he puts on i imagine i could get it pretty cheap if lucky a straight swap. still not worth it ?

22-Feb-2005, 00:27

Quote:

Originally posted by tony h
the bike its coming off is being used as a jig so it dont matter which subframe he puts on i imagine i could get it pretty cheap if lucky a straight swap. still not worth it ?

that depends on what u hope to achieve .....

tony h · 22-Feb-2005, 00:52

a little wieght savin +polish it up + u wont have the rear hanger lugs on display as on a bip subframe. should look a little neater

ziggi · 22-Feb-2005, 12:23

I found this mod an improvement - subjective but maybe i'm more sensitive

You can fit either 916SP P8 or 748R 1.6M ali subframe to the 996. I've done both - first with the 916SP and mounted the 1.6M CPU between the spars and then properly with a 748R subframe.

The fiddly bit is unpicking the wiring loom & lengthening the two fan wires to put the 1.6M CPU at the back of the subframe (rather than in the middle). Not difficult, just fiddly. You'll also need a monoposto undertray. The ali subframe won't fit with the bip undertray.

Any question, let me know. This was the only major difference in weight between the SPS and bip 996's.

Whele · 22-Feb-2005, 14:53

Well - that plus the carbon airbox, the fairing parts, guards, wheels and engine parts that the SPS boasts as standard.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

21-Feb-2005, 23:34	#1
tony h Registered Forum User Posts: 39 Join Date: Dec 2004 Location: notts subframe just converted my 996 bip to single seat & i know where theres a 916 sp? ali subfame are they pricey/hard to come by/& will it fit straight on a 996 bip im thinkin of asking if he wants to do a deal on my standard one Reply

21-Feb-2005, 23:44	#2
Dibble Posts: n/a it will fit but is in my opinion a pointless upgrade .... theres plenty of them about if you look and the bip ones are common as muck so not sure he'd see any value in it ..... Reply

22-Feb-2005, 00:24	#4
tony h Registered Forum User Posts: 39 Join Date: Dec 2004 Location: notts subframe the bike its coming off is being used as a jig so it dont matter which subframe he puts on i imagine i could get it pretty cheap if lucky a straight swap. still not worth it ? Reply

22-Feb-2005, 00:52	#6
tony h Registered Forum User Posts: 39 Join Date: Dec 2004 Location: notts subframe a little wieght savin +polish it up + u wont have the rear hanger lugs on display as on a bip subframe. should look a little neater Reply

22-Feb-2005, 14:53	#8
Whele Registered Forum User Mille Posts: 344 Join Date: Sep 2001 Location: Oxfordshire Mood: Meditating Well - that plus the carbon airbox, the fairing parts, guards, wheels and engine parts that the SPS boasts as standard. Reply