ST4S marchenisis ?

paynep · 28-Feb-2005, 22:19

Anyone know if the 5-spoke marchenisi's are lighter than the standard 3spoke brembos ? If so, by how much and is the rear 5.5 or 6 inch wide?

Cheers, Paul

Rushjob · 28-Feb-2005, 22:28

Yes they are although I can't remember by how much and the rear on the 4S is 5.5" wide.

Rushjob · 28-Feb-2005, 22:34

Found this courtesy of one of Shazzam's posts....

Rear
Marchesini 5-spoke aluminum - 12.0 lbs
Brembo 3-spoke aluminum - 13.3 lbs

Front
Marchesini 5-spoke aluminum - 9.2 lbs
Brembo 3-spoke aluminum - 11.5 lbs

paynep · 28-Feb-2005, 23:50

Thanks Rushjob,
The std 3-spoke weights are as per the Dymag website for a 916 so the front is probably the same, but the rear will be heavier as it has bearings/cush drive etc that the 916 doesn't........

So they still look to be about 4lb heavier than mag wheels......

Henners · 28-Feb-2005, 23:55

Damn sight easier to clean the three spokes - I prefer 'em

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

28-Feb-2005, 22:19	#1
paynep DSC Club Member Ducati Meccanica Posts: 2,081 Join Date: Jun 2001 Location: Alton Mood: Wet wet wet ST4S marchenisis ? Anyone know if the 5-spoke marchenisi's are lighter than the standard 3spoke brembos ? If so, by how much and is the rear 5.5 or 6 inch wide? Cheers, Paul Reply

28-Feb-2005, 22:28	#2
Rushjob Registered Forum User Big Twin Posts: 1,802 Join Date: Apr 2002 Location: Lincs Mood: :-) Yes they are although I can't remember by how much and the rear on the 4S is 5.5" wide. Reply

28-Feb-2005, 22:34	#3
Rushjob Registered Forum User Big Twin Posts: 1,802 Join Date: Apr 2002 Location: Lincs Mood: :-) Found this courtesy of one of Shazzam's posts.... Rear Marchesini 5-spoke aluminum - 12.0 lbs Brembo 3-spoke aluminum - 13.3 lbs Front Marchesini 5-spoke aluminum - 9.2 lbs Brembo 3-spoke aluminum - 11.5 lbs Reply

28-Feb-2005, 23:50	#4
paynep DSC Club Member Ducati Meccanica Posts: 2,081 Join Date: Jun 2001 Location: Alton Mood: Wet wet wet Thanks Rushjob, The std 3-spoke weights are as per the Dymag website for a 916 so the front is probably the same, but the rear will be heavier as it has bearings/cush drive etc that the 916 doesn't........ So they still look to be about 4lb heavier than mag wheels...... Reply

28-Feb-2005, 23:55	#5
Henners Registered Forum User Ducati Corse Posts: 3,338 Join Date: May 2002 Damn sight easier to clean the three spokes - I prefer 'em Reply