FS - Nemesis ECU for 998

pguenet · 01-Nov-2012, 23:40

Selling Nemesis ECU for 998

This is a Type 3 ECU, whilch is quite unusual as this is only dedicated to the 998
The later 999 uses the same ECU with a CAN connection whereas the 998 keeps all the standard analogue dash.

Looking for about GBP 500

Photos below:

skidlids · 02-Nov-2012, 08:22

Quote:

Originally Posted by pguenet

Seling Nemesis ECU for 998

This is a Type 3 ECU, whilch is quite unusual as this is only dedicated to the 998
The later 999 uses the same ECU with a CAN connection whereas the 998 keeps all the standard analogue dash.

Although it would run a DD bike very nicely if you fit a analouge tacho, as the AIR/MAP sensor is the same . Does away with all the coded Clocks etc and allows full access to Fuel and ignition mapping.

pguenet · 02-Nov-2012, 22:12

If anybody wanted to do this, i could offer some loom as well.

pguenet · 13-Nov-2012, 20:19

Any offers (not taking the mickey) before it goes on ebay?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

02-Nov-2012, 22:12	#3
pguenet Registered Forum User Big Twin Posts: 1,413 Join Date: Aug 2002 Location: Surrey If anybody wanted to do this, i could offer some loom as well. Reply

13-Nov-2012, 20:19	#4
pguenet Registered Forum User Big Twin Posts: 1,413 Join Date: Aug 2002 Location: Surrey Any offers (not taking the mickey) before it goes on ebay? Reply