How do i?

swannymere · 08-May-2005, 21:47

How do i cover this:

Can i fill it with something and then smooth it over,or do i have to grind it out?Any ideas appreciated

electricsheep · 08-May-2005, 21:52

what bike / pipe is that ?

swannymere · 08-May-2005, 21:56

Ducati 749 with termi assy can

Festa748 · 08-May-2005, 22:45

sand and polish

or sticker

Carbon749 · 08-May-2005, 22:49

Take it to a metal polisher and ask him to buff it out and ask him to "mop" the can but not polish it. Will leave it in a nice satin finish as per race bikes.

HW · 08-May-2005, 23:18

Quote:

Originally posted by Carbon749
Take it to a metal polisher and ask him to buff it out and ask him to "mop" the can but not polish it. Will leave it in a nice satin finish as per race bikes.

Ah ha ... good idea. I was wondering whether to polish that out or not. If they

Can't find something that says "for racing use only" then it might confuse enough to let it go. Maybe.

Surely isn't illegal to polish those "unsightly marks" out on there is it?

Carbon749 · 08-May-2005, 23:34

From my humble knowledge of the law the police can use their proffesional training to assess if an exhaust is excessively noisy or not ..... if they deem it to be noisy they can then check it with a DB meter. This is regardless of markings or the lack of markings.

I guess if you were not reving the bike whilst sat next to a cop car and were trying to "run quiet" then the lack of markings on the can may help if pulled by the fuz

The big benefit comes at MOT time. If the can has no markings at all then it's at the discretion of the tester if it will pass or not ..... most will smile and pass a race can.

[Edited on 8-5-2005 by Carbon749]

swannymere · 08-May-2005, 23:41

I want to remove it for all the above reasons.I would prefer not to grind it out,is there anything i can fill it with,and then polish?

Carbon749 · 08-May-2005, 23:47

No need to grind it out, a very light "mop" will sort it.

I guess if you try to fill it and sand it back you will still see the words as the filler will always be a slightly different colour and show against the colour of the can.

Mr C · 09-May-2005, 00:06

Quote:

Originally posted by Carbon749
No need to grind it out, a very light "mop" will sort it.

I guess if you try to fill it and sand it back you will still see the words as the filler will always be a slightly different colour and show against the colour of the can.

Call me Naive but what do u mean by a light Mop?

Please no Vileda Jokes

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

08-May-2005, 21:47	#1
swannymere Registered Forum User Big Twin Posts: 1,863 Join Date: Apr 2005 Location: Winchester-ish Mood: High as a kite! How do i? How do i cover this: Can i fill it with something and then smooth it over,or do i have to grind it out?Any ideas appreciated Reply

08-May-2005, 21:52	#2
electricsheep Registered Forum User Big Twin Posts: 1,037 Join Date: May 2003 Location: Reading Mood: Diet what bike / pipe is that ? Reply

08-May-2005, 21:56	#3
swannymere Registered Forum User Big Twin Posts: 1,863 Join Date: Apr 2005 Location: Winchester-ish Mood: High as a kite! Ducati 749 with termi assy can Reply

08-May-2005, 22:45	#4
Festa748 Registered Forum User Mille Posts: 286 Join Date: Mar 2004 Location: Selby North Yorks sand and polish or sticker Reply

08-May-2005, 22:49	#5
Carbon749 Registered Forum User Big Twin Posts: 1,956 Join Date: Mar 2005 Location: Normally in my own little world Mood: I own a flame thrower Take it to a metal polisher and ask him to buff it out and ask him to "mop" the can but not polish it. Will leave it in a nice satin finish as per race bikes. Reply

08-May-2005, 23:41	#8
swannymere Registered Forum User Big Twin Posts: 1,863 Join Date: Apr 2005 Location: Winchester-ish Mood: High as a kite! I want to remove it for all the above reasons.I would prefer not to grind it out,is there anything i can fill it with,and then polish? Reply

08-May-2005, 23:47	#9
Carbon749 Registered Forum User Big Twin Posts: 1,956 Join Date: Mar 2005 Location: Normally in my own little world Mood: I own a flame thrower No need to grind it out, a very light "mop" will sort it. I guess if you try to fill it and sand it back you will still see the words as the filler will always be a slightly different colour and show against the colour of the can. Reply