Suspension datum tool.

andyb · 22-Jul-2003, 22:20

I am looking into making some suspension datum tools, ie, the bit of kit you can measure your rear ride height exactly with. Would any one be interested.

I dont know how much these are to buy from Ducati or a suspension place, but im sure we could do it cheaper.

Dont forget you should really check this height everytime you adjust your chain!

Perhaps we could get someone to do a feature in pronto, so we understand the importance of the setting?

Your thoughts.

skidlids · 22-Jul-2003, 23:38

All ready made several, the ones I have sold to mates and DSC members were £25 each.

Jasper · 22-Jul-2003, 23:58

I have a CAD drawing and a pattern of the of the Ducati one if you want acopy.

Whele · 23-Jul-2003, 10:44

By all means get one made or make them yourself. However, They are available off the shelf from K-Tech for £48.

I did consider getting one made - but at that price it simply wasnt worth the hastle. They are laser cut items complete with adjustable brass location collars that fit into the frame.

Remember that if you measure to the top flat surface of the rear wheel nut that you must add 20.5mm to the reading to get the correct measurement.

Also, make sure that you lift the bike to the top of the suspension settling point each time before taking a measurement. The stiction of the rear damper can make a difference of 10mm.

Yellow Bip · 29-Jul-2003, 00:14

whele, how do i get hold of K-Tech mate?

Felix · 29-Jul-2003, 13:10

Here is the info:

K-Teck Suspension
Unit 1 Forest Court Linden Way Coalville Leicestershire LE67 3JY
01530 810 625

Highly recommended!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

22-Jul-2003, 23:38	#2
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club All ready made several, the ones I have sold to mates and DSC members were £25 each. Reply

22-Jul-2003, 23:58	#3
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK I have a CAD drawing and a pattern of the of the Ducati one if you want acopy. Reply

29-Jul-2003, 00:14	#5
Yellow Bip Registered Forum User Mille Posts: 166 Join Date: Oct 2002 Location: Chichester, Sussex Mood: tired!!!!!!!!! whele, how do i get hold of K-Tech mate? Reply

29-Jul-2003, 13:10	#6
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? Here is the info: K-Teck Suspension Unit 1 Forest Court Linden Way Coalville Leicestershire LE67 3JY 01530 810 625 Highly recommended! Reply