Termi fitting

gimpboy450 · 20-Jul-2005, 16:28

Just bought a new 50mm Termi System with Air Filter and CPU thingy. I can probably fit everything myself but was just wandering why it needs any setting up at a specialist? I thought its a bolt on goodie and no need to eff around??

Twinfan · 20-Jul-2005, 16:49

You need to get the CO2 trim pots set up properly. That's why you'll need to go to the dealer.

I think if you bolt on the pipework, you could then get the ECU, filters and CO2 done by the dealer for a low cost? They need to remove the tank (I think) to do the CO2, so they might as well fit the ECU and filters.

gimpboy450 · 20-Jul-2005, 17:14

Cheers buddy, if you fit everything without the CO2 setup will it work okay?

swannymere · 20-Jul-2005, 21:54

It will work,but you won't get any benefit from having fitted the system.It might run lean/rich or just rough.I fitted mine just before my service so that it could be sorted out then.Give a dealer/specialist a ring and ask how much to fit or just setup after you've fitted it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

20-Jul-2005, 16:28	#1
gimpboy450 Registered Forum User Montjuic Posts: 61 Join Date: Jun 2005 Location: Surrey Mood: crank it and bank it Termi fitting Just bought a new 50mm Termi System with Air Filter and CPU thingy. I can probably fit everything myself but was just wandering why it needs any setting up at a specialist? I thought its a bolt on goodie and no need to eff around?? Reply

20-Jul-2005, 17:14	#3
gimpboy450 Registered Forum User Montjuic Posts: 61 Join Date: Jun 2005 Location: Surrey Mood: crank it and bank it Cheers buddy, if you fit everything without the CO2 setup will it work okay? Reply