which slipper clutch

boyo · 24-Jul-2005, 20:24

Hi guys i need to replace the slipper clutch on my 749r, can anyone first tell me if the one ducati has fitted is any good and worth getting another one or is there something better out there iv heard lots of other options but dont know wot will be best for mine. Also an idea of cost please.

andyb · 24-Jul-2005, 20:44

Std 749r .throw it away. Get a six Ti posted stm....... or Bucci!

Or even one of those off of ebay that someone has a lot of............

JPM · 24-Jul-2005, 20:59

Weren't these gtting replaced under warranty as the ramps were too shallow or something and they were getting replaced with BUCCI slippers?

m1keyp · 25-Jul-2005, 14:17

Has anyone used one of these?

http://www.stein-dinse-shop.com/pdf/..._400183108.pdf

JPM · 25-Jul-2005, 14:21

No, never heard of them, strangest looking slipper I've seen in a while, might be the best one there is but could you get spares?

boyo · 25-Jul-2005, 18:41

andyb wot are the ones on ebay that you are on about?

JPM · 25-Jul-2005, 18:44

Quote:

Originally posted by boyo
andyb wot are the ones on ebay that you are on about?

Search for the ebay userid "niki748" seems to sell quite a bit of Corse stuff, including 4 & 6 post slippers

pete.lightbody · 26-Jul-2005, 20:43

Would agree with andyb. Standard clutch on 749r only fit for the bin. Have a Ti bucci on mine and works very well.

In reply to other, yes Ducati will replace the base plate on early models but the clutch is still not up to the job.

Spank · 27-Aug-2005, 05:52

Whats wrong with a standard Ducati slipper clutch?
I'm thinking of fitting one to my 749 Biposto, surely it's better than a normal clutch?

butch890 · 27-Aug-2005, 07:26

mine was replaced under warrenty with a Buchi ti slipper
Butch

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

24-Jul-2005, 20:44	#2
andyb Registered Forum User BSB Star Posts: 6,720 Join Date: Feb 2002 Location: northampton Mood: Has change happened...must of missed it! Std 749r .throw it away. Get a six Ti posted stm....... or Bucci! Or even one of those off of ebay that someone has a lot of............ Reply

24-Jul-2005, 20:59	#3
JPM Registered Forum User BSB Star Posts: 5,682 Join Date: Jun 2001 Location: NW England Mood: Soon my pet, soon Weren't these gtting replaced under warranty as the ramps were too shallow or something and they were getting replaced with BUCCI slippers? Reply

25-Jul-2005, 14:17	#4
m1keyp Registered Forum User 500SD Posts: 714 Join Date: Mar 2004 Location: Cambridgeshire Has anyone used one of these? http://www.stein-dinse-shop.com/pdf/..._400183108.pdf Reply

25-Jul-2005, 14:21	#5
JPM Registered Forum User BSB Star Posts: 5,682 Join Date: Jun 2001 Location: NW England Mood: Soon my pet, soon No, never heard of them, strangest looking slipper I've seen in a while, might be the best one there is but could you get spares? Reply

25-Jul-2005, 18:41	#6
boyo Registered Forum User Mille Posts: 118 Join Date: Jan 2004 Location: weston super mare andyb wot are the ones on ebay that you are on about? Reply

26-Jul-2005, 20:43	#8
pete.lightbody Registered Forum User Posts: 10 Join Date: Oct 2004 Would agree with andyb. Standard clutch on 749r only fit for the bin. Have a Ti bucci on mine and works very well. In reply to other, yes Ducati will replace the base plate on early models but the clutch is still not up to the job. Reply

27-Aug-2005, 05:52	#9
Spank Registered Forum User Montjuic Posts: 54 Join Date: Jul 2005 Whats wrong with a standard Ducati slipper clutch? I'm thinking of fitting one to my 749 Biposto, surely it's better than a normal clutch? Reply

27-Aug-2005, 07:26	#10
butch890 Registered Forum User Big Twin Posts: 1,602 Join Date: Jun 2003 Location: kettering Mood: Enjoying Togdom ! mine was replaced under warrenty with a Buchi ti slipper Butch Reply