998 problem when hot

Totto · 29-Jul-2005, 13:49

My 998 bp has the old jumpy tacho problem , i have checked the connectors & stuff and found nothing wrong , but when the bike gets realy hot like in traffic the tacho can get much worse then the bike has stalled the odd time & will refuse to even turn over and you need to bump start it , but then after you get it started & it cools down it starts ok

Any ideas welcome

Henners · 29-Jul-2005, 14:09

Red-leader had similar problems last year - drop him a U2U

Red-leader · 29-Jul-2005, 21:46

No mine was a problem with the temperature gauge. That was a loose wire on the sender unit.
You need to contact the experts.
Good luck
Kev

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

29-Jul-2005, 14:09	#2
Henners Registered Forum User Ducati Corse Posts: 3,338 Join Date: May 2002 Red-leader had similar problems last year - drop him a U2U Reply

29-Jul-2005, 21:46	#3
Red-leader Registered Forum User 500SD Posts: 882 Join Date: Oct 2002 Location: Chertsey Mood: wobbly !!! No mine was a problem with the temperature gauge. That was a loose wire on the sender unit. You need to contact the experts. Good luck Kev Reply