slipper clutch???

yorkshire pud · 05-Aug-2005, 00:54

i have a 4 post slipper, bought ebay. ? how many plates should i have. do i start with a frition plate. and last to go in is a steel, plate. .

nelly · 05-Aug-2005, 01:30

Depending on the type or manufacturer of the clutch pack you could have 7, 8 or 9 friction plates.
The more important factor is the pack width. Build the pack up on the bench and then measure it's thickness. You want 35.5 - 36.5mm
Use different steel plates to get the thickness. They are available in 1.5mm and 2mm.
Use a friction plate first, then alternate them. Finish with a steel plate under the pressure plate.
You could end up with two steels going in last depending upon the number of friction plates.

yorkshire pud · 05-Aug-2005, 01:44

cheers nelly.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

05-Aug-2005, 00:54	#1
yorkshire pud Registered Forum User Mille Posts: 182 Join Date: Sep 2004 Location: halfax west yorks Mood: poon tang slipper clutch??? i have a 4 post slipper, bought ebay. ? how many plates should i have. do i start with a frition plate. and last to go in is a steel, plate. . Reply

05-Aug-2005, 01:44	#3
yorkshire pud Registered Forum User Mille Posts: 182 Join Date: Sep 2004 Location: halfax west yorks Mood: poon tang cheers nelly. Reply